Heated Jacket Liner

$249.95

Most riders can get down to approximately 40 Degrees when wearing only the optional the Aero-Tex Liner, without the zip in Thermoloft Insulation. The two part Aero-Tex Jacket Liner will get most riders down to -20 Degrees below zero. (Note: If you ride a bike with no windshield/fairing at 60 mph, when it is 30 Degrees outside, this is -20 Degrees below zero wind chill.)

90 Watts of Heat using our NEW Soft Heat Pure Science Heating Method

Anti-bacterial Stretch Panels to keep heat against the body

Breathable Shells with Wind Stop & Moisture Block

Locker Hang Loop

Pocket in Pocket Designed to take the Remote Heat-Troller

Single Remote or Dual Remote Controller Functionality (See Controllers in the Accessories Section of our Web Site.)

Plug in wires to connect: Heated Gloves, Heated Pants and Heated Socks (Other brands of Controllers will plug into our Heated Jacket.) All Heated Gloves, Heated Pants and Heated Socks are now also available at Motoport.

The Heated Jacket is made custom to zip into our Aero-Tex Liner. If you order the Heated Jacket with a new jacket we custom fit the Heated Jacket into our Aero-Tex Liner. Note: The Aero-Tex Liner is needed to keep you 100% Waterproof/Windproof/Breathable. Both the Heated Jacket and the Aero-Tex Liner can be worn individually.

If you already have an Aero-Tex Liner, the liner will need to be returned for proper custom fitting, so the Heated Jacket will zip into the Aero-Tex Liner. If you place the order on our web site please let us know that you have the Aero-Tex Liner. We will email shipping instructions. If you call us to place the order we can provide shipping instructions over the phone.

Sizing *

Detailed measurements are required to place an order. Please provide appropriate measurements below. Please refer to our Sizing Guides page for detailed instructions.

SKU: Liner1 Category:

* This product price DOES NOT reflect delivery costs, these costs are calculated and charged at the time of shipment. Please read our Ordering Process for more information.

Motoport Sizing Guides

Please call or email your measurements to ensure proper fit. For riders that require custom sizing please call 1-800-777-6499 or email motoportusa@earthlink.net.

Ordering/Shipping

Please call for more accurate ship dates. 1-800-777-6499

Sizing Guide:
To ensure proper sizing Motoport needs: Height / Weight / Sleeve (from center at base of neck around outside of arms to bend in wrist). To give us the most accurate sleeve measurement, follow the Dress Shirt Sleeve instructions below. Actual Chest / Actual Waist. (No jacket or pant sizes.)Do not inhale when measuring chest. Waist should be measured where you tighten the belt. All measurements taken in a relaxed position. Tape measure should also be comfortable, not tight or loose.NOTE:If ordering Aero-Tex liner we need a neck circumferance measurement at collar height or 2″ from the base of your neck.Follow these instructions to measure for correct sleeve lengthMeasuring a motorcycle jacket alone is not good. Please help to confirm the proper sleeve length by measuring a Dress Shirt Sleeve length as shown below. Also make sure to mention when providing this measurement, that this is a dress shirt sleeve length not a jacket sleeve length measurement, measured as shown in Sizing Detail.

Note: Your dress shirt sleeve measured as shown above should be approximately 2″ shorter than the jacket sleeve length measured.

After we receive the above measurements, we will advise if any other measurements are necessary.

Description

Most riders can get down to approximately 40 Degrees when wearing only the optional the Aero-Tex Liner, without the zip in Thermoloft Insulation. The two part Aero-Tex Jacket Liner will get most riders down to -20 Degrees below zero. (Note: If you ride a bike with no windshield/fairing at 60 mph, when it is 30 Degrees outside, this is -20 Degrees below zero wind chill.)

90 Watts of Heat using our NEW Soft Heat Pure Science Heating Method

Anti-bacterial Stretch Panels to keep heat against the body

Breathable Shells with Wind Stop & Moisture Block

Locker Hang Loop

Pocket in Pocket Designed to take the Remote Heat-Troller

Single Remote or Dual Remote Controller Functionality (See Controllers in the Accessories Section of our Web Site.)

Plug in wires to connect: Heated Gloves, Heated Pants and Heated Socks (Other brands of Controllers will plug into our Heated Jacket.) All Heated Gloves, Heated Pants and Heated Socks are now also available at Motoport.

The Heated Jacket is made custom to zip into our Aero-Tex Liner. If you order the Heated Jacket with a new jacket we custom fit the Heated Jacket into our Aero-Tex Liner. Note: The Aero-Tex Liner is needed to keep you 100% Waterproof/Windproof/Breathable. Both the Heated Jacket and the Aero-Tex Liner can be worn individually.

If you already have an Aero-Tex Liner, the liner will need to be returned for proper custom fitting, so the Heated Jacket will zip into the Aero-Tex Liner. If you place the order on our web site please let us know that you have the Aero-Tex Liner. We will email shipping instructions. If you call us to place the order we can provide shipping instructions over the phone.

X