Riva Stretch Jacket

The following mentions of the words “Stretch” and “Mesh” refer to the materials Made with Dupont™ Kevlar® Fiber.

The Riva Stretch Jacket is made in the USA custom, for any size rider. Motoport has made the waist cut GP2  Jacket for many years. Riders wanted the same waist cut Jacket in a stylish looking all around jacket. The new Riva Jacket can be worn anywhere and still provide performance beyond any other motorcycle apparel. The Riva Jacket doesn’t have double layers of blended material like the GP-2 Jacket.  The Riva also has Stretch flaps over the front pockets.

This jacket is cooler than wearing a T-Shirt in hot weather yet provides better protection than the best leather racing suits. The Riva Jacket will perform better than any other riding gear by a long shot. Stronger material! Better Armor with Far More Coverage! Better in Hot Weather! Better in Cold Weather! Stronger Seams! 100% Waterproof/Windproof/Breathable with optional liner!

The Riva is a waist cut jacket.  Read: Waist Cut vs 3/4 Length Jackets Here

Main Color *





Trim Color *






Stretch Jacket Options

























Sizing *

Detailed measurements are required to place an order. Please provide appropriate measurements below. Please refer to our Sizing Guides page for detailed instructions.

$825.00

SKU: 102346 Categories: , ,

* This product price DOES NOT reflect delivery costs, these costs are calculated and charged at the time of shipment. Please read our Ordering Process for more information.

Motoport Sizing Guides

Please call or email your measurements to ensure proper fit. For riders that require custom sizing please call 1-800-777-6499 or email motoportusa@earthlink.net.

Ordering/Shipping

Please call for more accurate ship dates. 1-800-777-6499

Sizing Guide:
To ensure proper sizing Motoport needs: Height / Weight / Sleeve (from center at base of neck around outside of arms to bend in wrist). To give us the most accurate sleeve measurement, follow the Dress Shirt Sleeve instructions below. Actual Chest / Actual Waist. (No jacket or pant sizes.)Do not inhale when measuring chest. Waist should be measured where you tighten the belt. All measurements taken in a relaxed position. Tape measure should also be comfortable, not tight or loose.NOTE:If ordering Aero-Tex liner we need a neck circumferance measurement at collar height or 2″ from the base of your neck.Follow these instructions to measure for correct sleeve lengthMeasuring a motorcycle jacket alone is not good. Please help to confirm the proper sleeve length by measuring a Dress Shirt Sleeve length as shown below. Also make sure to mention when providing this measurement, that this is a dress shirt sleeve length not a jacket sleeve length measurement, measured as shown in Sizing Detail.

Note: Your dress shirt sleeve measured as shown above should be approximately 2″ shorter than the jacket sleeve length measured.

After we receive the above measurements, we will advise if any other measurements are necessary.

Description

Features

• World’s top rated, lightweight, perforated Tri-Armor that fully covers: Back, shoulders, elbow/forearms and chest. All Tri-Armor is in Velcro secured pockets and can be removed. Motoport’s Tri-Armor covers more of the body that any other motorcycle apparel available. This provides the world’s best coverage for impact protection. Tri-Armor molds to the body in 30 minutes or less. After initial break the armor becomes comfortable with no restriction of movement. The Tri-Armor is all perforated and does not make the shirt warmer in hot weather. The armor pulls the material away from the skin making an air space for the perforated armor to breathe. CLICK HERE to view the jacket Tri-Armor.

• Hydrophilic Nylon Mesh Lining on the inside. The Hydrophilic Lining wicks away sweat and makes the liner more comfortable, even when worn directly against the skin.

• Two 5 inch zipper intake vents on the sleeves with two 5 inch exhaust vents on the back for more comfort even when riding slow with no air flow in hot weather.

• Rubber coated snaps.

• 3M 1.5″ Scotchlite reflective across back.

• Two upper front zip pockets, plus two hand warmer pockets, all covered with flaps made from Stretch. One inside zip pocket in the chest area is also provided.

• Velcro adjustments strap at the collar, two on each sleeves at the bicep and forearm, one at the wrist and one on each side of the waist.

• All zippers are top quality Heavy Duty YKK. Large full circumference YKK waist zipper included that is made to zip a pant to the jacket. Note: All waist cut jackets should zip to the pant for proper protection. Waist cut jackets can ride up the torso both while riding or in a tumble.

Note: It is important to match the same zipper on the pant to the jacket. If you have a Motoport pant please let us know the size and length of the waist zipper to connect to the jacket. If you have another pant that will zip to the Riva Jacket the chance that it will match our zipper is extremely slim. We can sew our zipper on your pant for $29.00. We can also send you the zipper that would be sewn onto your pant no charge.

• All construction seams Safety Lock Stitched that provide over 2000LBS tear strength. 5 threads woven on the inside seam with 3 threads sewn over the top. Each thread has over 100 pounds of tear strength.

Options

• Quad-Armor – Four-layer system that is the highest rated impact-absorbing armor in the world. Quad-Armor protects elbow/forearm, shoulder, back and chest. Quad-Armor has passed and exceeded the new EN Certification and covers more of the body than any other brand. See Quad-Armor in the ARMOR Section. $358.95. To read more about Quad-Armor and Motoport’s crash test studies click on “Must Read Articles”.

• 3M 1.5″ Scotchlite reflective down the outside of both sleeves. $29.00 •We now have 3 different types of 100% Waterproof/Windproof/Breathable Aero-Tex Jacket Liners available:

1. Aero-Tex Jacket Liner with no insulation. Riding temperature ranges from of 40 F to 85 F in comfort. $129.00

2. Two part liner with zip out Thermoloft Insulation. Ride from -20F to 55F with the optional Two Part Aero-Tex Liner. Zip out the Thermoloft Insulation, it’s still 100%Waterproof/Windproof/Breathable and ride from 40f to 85f in comfort. $189.00

3. Aero-Tex Jacket Liner no insulation with zip in zip out Heated Jacket Liner. This is the ultimate in comfort for extreme cold weather riding. No other layering necessary. $298.00 Note: Remote controllers are necessary to adjust heat and plug into motorcycle. These are shown in the Accessories Section.

• Remove the liner completely and ride from 60f to 120f. See: “Why Remove the Aero-Tex Liner in Motoport’s Dictionary”.

• Small sleeve pocket for quick access to keys or change. $19.00

• Emergency Information Pocket: If you crash and are unconscious or can’t move, this is the place to have Emergency Information. Name, other contact info, blood type, allergies etc. can be put on a plastic card for quick easy to see important information for the paramedics or doctor. We use a bright red Stretch panel and sew it on top of the right shoulder. It stays shut with a strong Velcro closure and has a pull tab for quick access. If you’re laying on your back or front side, this pocket can still be seen. $19.00

• Velcro on Reflective.

www.leatt-brace.com. We add a collar to the jacket that can be zipped on/off and the Leatt Neck Brace can be worn. We use a strong heavy duty YKK Zipper to attach the collar section when the brace is not being used. This custom collar has the same Polar Fleece on the inside with a Stretch outside material. To see the Leatt Neck Brace Collar CLICK HERE.

• Clear Velcro Pocket. (6” long and 4” wide) This pocket can be used for maps or identification to enter secure facilities. This pocket attaches very quickly with Velcro, and can be taken on and off in seconds. Unless specified, we put this pocket on the left sleeve $29.00

• Clear ID Pocket. (4” long and 3” wide) This pocket is sewn on. Clear ID pocket that can be used for identification to enter secure facilities. Unless specified, we put this pocket on the left sleeve. $19.00.

Sizing

SIZING IS REQUIRED TO PLACE AN ORDER!

About Materials Made with Dupont™ Kevlar® Fiber

The Riva Jacket is made in house with the racing grade four-way Stretch. This is the only synthetic material approved for road racing. See: “Save Your Hide” for materials Tear and Abrasion strength.

Colors

• Stretch  combination colors: black, red/black, blue/black, gray/black, yellow/black. Many different color combinations can be made. •

CLICK HERE to view color samples of our material.

• Motoport can send material swatches to show the strength and different colors available.

Click on the link below to find your measurements and how to take them. These measurements are REQUIRED to place an order.

Warranty

• Customer Satisfaction 100% Guaranteed on all standard sized, standard color jackets.

• To support the claims made by Motoport about Materials Made with Dupont™ Kevlar® Fiber , and to confirm the protective/long lasting qualities of this clothing , this garment has a 7-year warranty.

• IF YOU EVER CRASH, AT ANY SPEED, IN A MOTOPORT  GARMENT (SUIT, JACKET, PANT, OR SHIRT) Made with Dupont™ Kevlar® FiberAND MOTOPORT CAN’T REPAIR IT, MOTOPORT WILL REPLACE THE GARMENT FOR FREE.

More Information

• Production times vary throughout the year. A current actual production time is on the home page directly below the flash photos.

Note: The Riva style can also be made into a Riva Mesh  Jacket for $30.00 less. You should consider the Riva  Mesh or Air Mesh Jackets, both similar waist cut models, for the following reasons:

1. If you ride in temps over 90f in traffic at slow speeds or if you ride in temps over 90f with a windshield/fairing.

2. If you ride off road at temps over 85f.

3. If you’re the type person that has a problem with heat when riding.

4. The Stretch is the best jacket to wear in dry hot weather on a bike with little or no windshield.

This jacket is made in house by Motoport custom made in your size. If you gain or lose weight Motoport can alter the jacket. If you crash and the jacket needs repair Motoport can fix it quickly. (Usually in 3 to 5 working days repairs/alterations can be made.) No matter what size you wear Motoport can make it for you! In some cases custom charges will apply. If you have any other questions please call: 800-777-6499 or E-Mail at motoportusa@earthlink.net

X