Ultra Trek Stretch Suit

The following mentions of the words “Stretch” and “Mesh” refer to the materials Made with Dupont™ Kevlar® Fiber.

After many requests Motoport finally made a one-piece Suit. We make this suit here in the USA custom for any size rider. This suits entire outer shell is made from Stretch , the same material we make our approved road racing suits from. There is no other one-piece suit that even compares. Wear in comfort from 60F up to 120F. Zip in the optional Aero-Tex One Piece Suit Liner, now you have a great suit for cold/wet weather. Put suit on or take off in seconds. Wear clothing or even bicycle shorts with a synthetic t-shirt on hot days. This is the first one-piece synthetic suit made with no Polyurethane coating on the inside—no worries about the suit melting into the skin when sliding on asphalt.

Colors

  • Stretch  combination colors: black, red/black, blue/black, gray/black, bright yellow/black. Many different color combinations can be made.
  • Stretch  solid colors: black, red, blue, gray and bright yellow.
  • Motoport can send material swatches to show the strength and different colors available.

Additional Options





















Sizing *

Detailed measurements are required to place an order. Please provide appropriate measurements below. Please refer to our Sizing Guides page for detailed instructions.

$1,529.00

SKU: 102.165 Category:

* This product price DOES NOT reflect delivery costs, these costs are calculated and charged at the time of shipment. Please read our Ordering Process for more information.

Motoport Sizing Guides

Please call or email your measurements to ensure proper fit. For riders that require custom sizing please call 1-800-777-6499 or email motoportusa@earthlink.net.

Ordering/Shipping

Please call for more accurate ship dates. 1-800-777-6499

Sizing Guide:
To ensure proper sizing Motoport needs: Height / Weight / Sleeve (from center at base of neck around outside of arms to bend in wrist). To give us the most accurate sleeve measurement, follow the Dress Shirt Sleeve instructions below. Actual Chest / Actual Waist. (No jacket or pant sizes.)Do not inhale when measuring chest. Waist should be measured where you tighten the belt. All measurements taken in a relaxed position. Tape measure should also be comfortable, not tight or loose.NOTE:If ordering Aero-Tex liner we need a neck circumferance measurement at collar height or 2″ from the base of your neck.

Follow these instructions to measure for correct sleeve length

Measuring a motorcycle jacket alone is not good. Please help to confirm the proper sleeve length by measuring a Dress Shirt Sleeve length as shown below. Also make sure to mention when providing this measurement, that this is a dress shirt sleeve length not a jacket sleeve length measurement, measured as shown in Sizing Detail.

Note: Your dress shirt sleeve measured as shown above should be approximately 2″ shorter than the jacket sleeve length measured.

After we receive the above measurements, we will advise if any other measurements are necessary.

Description

The following mentions of the words “Stretch” and “Mesh” refer to the materials Made with Dupont™ Kevlar® Fiber.

After many requests Motoport finally made a one-piece Suit. We make this suit here in the USA custom for any size rider. This suits entire outer shell is made from Stretch , the same material we make our approved road racing suits from. There is no other one-piece suit that even compares. Wear in comfort from 60F up to 120F. Zip in the optional Aero-Tex One Piece Suit Liner, now you have a great suit for cold/wet weather. Put suit on or take off in seconds. Wear clothing or even bicycle shorts with a synthetic t-shirt on hot days. This is the first one-piece synthetic suit made with no Polyurethane coating on the inside—no worries about the suit melting into the skin when sliding on asphalt.

Colors

  • Stretch  combination colors: black, red/black, blue/black, gray/black, bright yellow/black. Many different color combinations can be made.
  • Stretch  solid colors: black, red, blue, gray and bright yellow.
  • Motoport can send material swatches to show the strength and different colors available.

Features

• World’s top rated, lightweight, perforated Tri-Armor that fully covers: Back, shoulders, elbow/forearms, chest, full wrap around thighs and knee shins. All Tri-Armor is in Velcro secured pockets and can be removed. Motoport’s Tri-Armor covers more of the body that any other motorcycle apparel available. This provides the world’s best coverage for over all impact protection. Tri-Armor molds to the body in 30 minutes or less. After initial break the armor becomes comfortable with no restriction of movement. The Tri-Armor does not make the jacket warmer in hot weather. The perforated Tri-Armor pulls the jacket material away from your skin creating an air space that allows the armor to breathe. CLICK HERE to view the jacket Tri-Armor.

• Double layers of material in the butt section.

• Full length heavy duty YKK zipper for the main opening that runs from the neck all the way down to the foot. The left leg has a long zipper that opens up to above the knee. Step in and out of suit in seconds. No need to remove boots shoes or any clothes. Riders wearing motocross boots or large street boots in some cases may need to remove left boot only.

• All critical seams Safety Lock Stitched. Five threads woven on the inside and triple stitched over the top. Each individual thread has over 100lbs. tear strength. No other motorcycle garment made has even close to the seam strength. With the Safety Lock Stitched the Mesh has a seam strength which is over 2000lbs.

• Four pockets in front along with two large leg pockets. Two inside chest pockets. Quick access to inside pant pockets from zippered/Velcro pockets on hips.

• Velcro adjustment straps above the waist to insure proper fit with or without clothes underneath.

• Material is very water resistant and dries in minutes after a rainfall or washing.

 3M 1.5″ Scotchlite reflective across back is standard.

• Hydrophilic Nylon Mesh Lining on the inside. The Hydrophilic Lining wicks away sweat and makes the liner more comfortable, even when worn directly against the skin.

About Materials Made with Dupont™ Kevlar® Fiber

Why is this better? The Stretch is 5 times stronger than leather and less than half the weight. See “Save Your Hide” to learn more about the tear and abrasion strength. The world’s first all season One Piece Suit that will take you from -20F to 85F with optional two part Waterproof/Windproof/Breathable zip in Aero-Tex liner. Remove the liner and have a fully breathable suit that will take you from 60f to 120F. You don’t need two or three different riding outfits for different weather. The Ultra Trek One Piece suit is great for any weather.

Only the best materials are used. Ask what the other one piece suits are made of. The majority Motoport has seen are made of Polyester that has a 100% Polyurethane Coating. Polyester has poor tear/abrasion strength along with a very low melting range. Adding Polyurethane coating to Polyester is like adding gas to a fire. Sliding on pavement with any other Air Mesh jacket or pant is not safe. Motoport has seen many riders with permanent skin damage where the Polyurethane coating melted into the skin.

The new Ultra Trek suit material has the highest tear strength of any motorcycle garment ever made! 500 Denier Cordura (the best material companies use for overall construction will tear at 22lbs). The Stretch material tears at 460 pounds!! Take your body weight and multiply that by the speed on a motorcycle. All the other nylon suits made can tear at a low speed tumble! If the best material of all other synthetic jacket/pants tears at 22lbs. imagine how poor the seam strength is! No other leather suit or synthetic suit has proper seam strength. Motoport Safety Lock Stitches all of the construction seams that will provide more than 2000lbs. of strength.

Abrasion strengths of Polyester are not even close to adequate for riding a motorcycle on pavement.

 

Options

• Quad Armor- a four-layer system that is the highest rated impact-absorbing armor in the world. Quad-Armor protects elbow/forearm, shoulder, back, chest, full wrap around thighs and knee/shin. Quad-Armor has passed and exceeded the new EN Certification and covers more of the body than any other brand. See Quad-Armor in the ARMOR Section. $388.00

• 3M 3″ Scotchlite bright yellow reflective across back. $10.00

• 3M 1.5″ Scotchlite bright yellow reflective across back. No charge.

• 3M 1.5″ Scotchlite bright yellow reflective down the outside of both sleeves. $29.00

• 3M 1.5″ gray Scotchlite reflective down the outside of both sleeves. $29.00

• Two 3M 1” Yellow Scotchlite bands around upper bicep area. $29.00

• Two 3M 1” Yellow Scotchlite bands around upper bicep area. $29.00

• Small zippered pocket on the sleeve for quick access to keys or change. $19.00 (See photos)

• Small pocket on the outside of the right chest pocket. Can be used for an I-Pod, change, ear plugs etc… $19.00

• Aero-Tex One Piece Suit Liner with no insulation. Riding temperature ranges from of 40 F to 85 F in comfort. $199.00

• Emergency Information Pocket: If you crash and are unconscious or can’t move, this is the place to have Emergency Information. Blood type, allergies etc. can be put on a plastic card for quick easy to see important information for the paramedics or doctor. We use a bright red Stretch panel and sew it on top of the right shoulder. It stays shut with a strong Velcro closure and has a pull tab for quick access. If you’re laying on your back or front side, this pocket can still be seen. $19.00

• Velcro on Reflective. $69.00

• www.leatt-brace.com. We add a collar to the jacket that can be zipped on/off and the Leatt Neck Brace can be worn. We use a strong heavy duty YKK Zipper to attach the collar section when the brace is not being used. This custom collar has the same Polar Fleece on the inside with a Stretch outside material. To see the Leatt Neck Brace CLICK HERE.

• Clear Velcro Pocket is 6” long and 4” wide. This pocket can be used for maps or identification to enter secure facilities. This pocket attaches very quickly with Velcro, and can be taken on and off in seconds. Unless specified, we put this pocket on the left sleeve. $29.00

• Clear ID Pocket 4” long and 3” wide. This pocket is sewn on. Clear ID pocket that can be used for identification to enter secure facilities. Unless specified, we put this pocket on the left sleeve. $19.00

Measurements:

We need all the measurements shown for a jacket/pant along with torso length. To determine correct torso length, measure from the base of the front neck (just below the Adam’s apple) down around the crotch, to the base of the neck in back (top of spine). These must be exact measurements, with only underwear on.)

Warranty

• Customer Satisfaction 100% Guaranteed on all standard sized, standard color jackets.

• To support the claims made by Motoport about Materials Made with Dupont™ Kevlar® Fiber , and to confirm the protective/long lasting qualities of this clothing , this garment has a 7-year warranty.

• IF YOU EVER CRASH, AT ANY SPEED, IN A MOTOPORT GARMENT (SUIT, JACKET, PANT, OR SHIRT) with Materials Made with Dupont™ Kevlar® Fiber AND MOTOPORT CAN’T REPAIR IT, MOTOPORT WILL REPLACE THE GARMENT FOR FREE.

More Information

• This suit is custom made to your exact size and measurements and cannot be returned. If the fit is a problem, Motoport can alter to correct sizing issues in 7 to 10 working days. If you gain or lose weight Motoport can always alter the suit. Call for more information about alteration.

• A current actual production time is on the home page directly below the flash photos.

• Customer Satisfaction 100% Guaranteed on all standard sized, standard color jackets.

X