* This product price DOES NOT reflect delivery costs, these costs are calculated and charged at the time of shipment. Please read our Ordering Process for more information.
Aero-Tex Pant Liner
This liner is designed to wear with all of our over pants.
Made in the USA, custom for any size rider.
The Aero-Tex Pant Liner is the first 100% Waterproof/Windproof/Breathable pant that has no Polyurethane coating on the face fabric. This allows the rider to get far better breathability in the warmer weather. (See Polyurethane in our Dictionary) Materials made with Gore-Tex are coated with Polyurethane (plastic) that degrades the breathability in the warm temperatures. Most riders can go into the low 40F up to 90F wearing pants and the liner under the Ultra II Pants on a bike without a fairing. With a windshield it is possible to ride down into the high 20f range. With good Thermal underwear under jeans with the liner zipped in it is possible to ride in sub zero temperatures.
Motoport Sizing Guides
Please call or email your measurements to ensure proper fit. For riders that require custom sizing please call 1-800-777-6499 or email email@example.com.
Please call for more accurate ship dates. 1-800-777-6499
To ensure proper sizing Motoport needs: Height / Weight / Sleeve (from center at base of neck around outside of arms to bend in wrist). To give us the most accurate sleeve measurement, follow the Dress Shirt Sleeve instructions below. Actual Chest / Actual Waist. (No jacket or pant sizes.)Do not inhale when measuring chest. Waist should be measured where you tighten the belt. All measurements taken in a relaxed position. Tape measure should also be comfortable, not tight or loose.NOTE:If ordering Aero-Tex liner we need a neck circumferance measurement at collar height or 2″ from the base of your neck.
Follow these instructions to measure for correct sleeve length
Measuring a motorcycle jacket alone is not good. Please help to confirm the proper sleeve length by measuring a Dress Shirt Sleeve length as shown below. Also make sure to mention when providing this measurement, that this is a dress shirt sleeve length not a jacket sleeve length measurement, measured as shown in Sizing Detail.
Note: Your dress shirt sleeve measured as shown above should be approximately 2″ shorter than the jacket sleeve length measured.
After we receive the above measurements, we will advise if any other measurements are necessary.
Pant liner dries in minutes after the rain stops. Lined with the best Hydrophilic nylon mesh that also has no Polyurethane coating. We used to make a Liner with sewn in Thermoloft. The Liner with sewn in Thermoloft is too warm for temperatures over 55f.. Almost every rider returned this liner complaining about being too warm. More versatility can be gained from the liner with no Insulation.
Our long distance touring riders wear both the jacket and pant liners in a sleeping bag on cold nights for comfort. Liners can be worn alone without pant or jacket on. Short zipper inside back below waist with snaps at cuffs. Zipper/Velcro/Double flap three way seal to waterproof both leg zippers. Right leg fully unzips and left leg unzips above crotch. It is not necessary to remove pant or boots to put on liner. If it starts to rain the liner can be put on in seconds. It does not need to be zipped in for quick installation. In most of the country the liner can be left zipped in for 7 or more months of the year.
• All zippers top quality YKK.
• Machine washable
• If you have the Ultra II Pant and didn’t order the liner with the pant, we need to know the inseam length along with the production number and size of pant. Both production number and size are in the inside butt area.
• All Aero-Tex liners come with a material Lifetime Waterproof/Windproof/Breathable Warranty.
• Liner color can change with the availability of materials.
• Hydrophilic Nylon Mesh Lining on the inside. The Hydrophilic Lining wicks away sweat and makes the liner more comfortable, even when worn directly against the skin.
• Customer Satisfaction Guaranteed!
Some riders comment that they don’t like the outer shell getting wet when the waterproof liner is on the inside. The uncoated outer suit material completely dries in less than five minutes when riding. With the majority of other suits the outer Polyurethane coated shell gets wet before hitting the waterproof membrane. The Polyurethane traps the water, sometimes taking hours to dry.
Some riders comment that they don’t want to have to remove the suit to put on the liner. I don’t know of any riders that put on a rain suit before it starts to rain. Trying to put a rain pant over an over pant that is wet is by far more difficult than simply removing the over pant in seconds, stepping into the Aero-Tex Pant Liner and then putting the over pant on again in seconds. It is not necessary to remove boots, pants underneath, and then put on the Aero-Tex Pant Liner. Liner doesn’t need to be zipped in for quick on/off situations.
Another reason to wear the liner underneath is that the waterproof membrane breathes much better when it is closer to the skin. Our long distant riders love wearing the Aero-Tex Liners in a sleeping bag at night or when walking around the campground during cold nights.
Rain Pants can also be used. Just remember that a rain pant can rip just falling off the motorcycle on the kick stand. Rain Pants can also have a very short life span. Outer Rain Pants can also melt when touching a hot pipe.