* This product price DOES NOT reflect delivery costs, these costs are calculated and charged at the time of shipment. Please read our Ordering Process for more information.
Marathon Air Mesh Jacket
The following mentions of the words “Stretch” and “Mesh” refer to the materials Made with Dupont™ Kevlar® Fiber.
Designed for the everyday motorcycle rider. Made from Dupont™ Kevlar® Fiber that is 10 times stronger than the best competition grade leather. The Marathon offers breathability, durability, and comfort through the air mesh weave. There’s no need for multiple jackets in your closet with this all season protection. Layer our insulated 2-part liner underneath for riding in wind, rain, and even snow. Custom sized and designed for every order. Always made in the USA.
Mesh Jacket Options
Motoport Sizing Guides
Please call or email your measurements to ensure proper fit. For riders that require custom sizing please call 1-800-777-6499 or email email@example.com.
Please call for more accurate ship dates. 1-800-777-6499
To ensure proper sizing Motoport needs: Height / Weight / Sleeve (from center at base of neck around outside of arms to bend in wrist). To give us the most accurate sleeve measurement, follow the Dress Shirt Sleeve instructions below. Actual Chest / Actual Waist. (No jacket or pant sizes.)Do not inhale when measuring chest. Waist should be measured where you tighten the belt. All measurements taken in a relaxed position. Tape measure should also be comfortable, not tight or loose.NOTE:If ordering Aero-Tex liner we need a neck circumferance measurement at collar height or 2″ from the base of your neck.
Follow these instructions to measure for correct sleeve length
Measuring a motorcycle jacket alone is not good. Please help to confirm the proper sleeve length by measuring a Dress Shirt Sleeve length as shown below. Also make sure to mention when providing this measurement, that this is a dress shirt sleeve length not a jacket sleeve length measurement, measured as shown in Sizing Detail.
Note: Your dress shirt sleeve measured as shown above should be approximately 2″ shorter than the jacket sleeve length measured.
After we receive the above measurements, we will advise if any other measurements are necessary.
This Jacket is custom made to your size. Please find sizing instructions below.
- Follow this link to Men’s Jacket Sizing
- Follow this link to Womens Jacket Sizing
- Please Provide ALL the Measurements Listed In the Links above in the box to the Left.
-Comes fully armored with our top rated Tri-Armor: Back, Shoulders, Elbow/Forearms, Chest. All armor is in Velcro secured pockets and can be removed.
– Water resistant. Jacket will dry in minutes after a rainfall when riding.
-All critical seams are Safety Lock Stitched. All construction seams have over 2000 pound strength. Material is over lapped, 5 woven threads on the inside with 3 threds stitched over the top. Each individual thread has over a 100 pound tear strength.
-No Polyurethane coating
-Four large outer chest pockets
-Two inside zip pockets
-Velcro or snap adjusters on the chest, wrists, arms, collar, and bottom hem of jacket
-3M Reflective across the back
-Hydrophilic Nylon Mesh Lining that covers the inside of the jacket. Mesh lining will help wick away sweat and make the jacket feel comfortable against the skin.